Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Heating Fan from a Renault Scenic 3?

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Blower motor

It's easy to suspect that the heating fan in your vehicle, for example, the Renault Scenic 3, is not working. When you turn it on, no air comes out, and you can't hear the fan spinning, which is a bad sign. Unless the fuse is blown, the fan itself needs to be repaired or replaced. Now, let's move on to the removal: Since it is located under the dashboard, centrally, you will need to completely remove the glove compartment, then unscrew the screws that hold it in place, and finally disconnect the power cable connectors. Now we are ready to extract it from its housing.

Updated on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2003-2009 / MK 2, Scenic 2) Today, we will explain how to replace the heating fan resistor on a Renault Scenic. To perform this operation, remove the lower part of the dashboard…
Renault Scenic (2003-2009 / MK 2, Scenic 2) Changing the heating resistor of a Renault Scenic 2 is not that complicated, but it requires a bit of patience and some manual skill. The resistor is…
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the cabin fan in a Renault Scenic, you will need to completely dismantle the dashboard to access the underlying components. To do this, pr…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos