Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Fan Resistor on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

Today, we will explain how to replace the heating fan resistor on a Renault Scenic. To perform this operation, remove the lower part of the dashboard near the gear selector using a flathead screwdriver to pry it loose.

Using a torque wrench with a T20 bit, remove the 5 screws to access the upper dashboard; take out the plastic dashboard and disconnect the heating fan connector. Remove the resistor and insert the new one, connecting it to the connector.

Finally, reassemble the dashboard parts that were previously removed.


Posted on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (1996-2003 / ) How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the…
How do you change the heating resistor in a Renault Scenic 2?
How do you change the heating resistor in a Renault Scenic 2?
Renault Scenic (2003-2009 / Scenic 2, MK 2) Changing the heating resistor of a Renault Scenic 2 is not that complicated, but it requires a bit of patience and some manual skill. The resistor is…
How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) How to replace the fan resistor on a Renault Scenic? Let's see how to carry out the disassembly. Remove the plastic cover above the centre tunnel usi…

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos