Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the heating resistor in a Renault Scenic 2?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Heater core

Changing the heating resistor of a Renault Scenic 2 is not that complicated, but it requires a bit of patience and some manual skill. The resistor is generally located behind the dashboard, near the heating fan, and its task is to regulate the airflow speed. First, disconnect the battery to avoid any surprises. Then, remove the panel under the dashboard, where the fan is located. Once you have found the resistor (usually a small square component with several connectors), disconnect the wires and unscrew the screws holding it in place. Insert the new resistor, screw it back in, and reconnect the wires. Reassemble the panel, reconnect the battery, and check if everything is working correctly. A simple job, but it requires attention and some time! If you do not feel comfortable doing it yourself, contact an experienced mechanic.

Posted on 10 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the heating resistor of a Renault Scenic
How to replace the heating resistor of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) This video tutorial shows the procedure to follow in order to replace the heating resistor of a Renault Scenic car. You will need a torx screwdriver,…
How to Replace the Heating Fan Resistor on a Renault Scenic
How to Replace the Heating Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today, we will explain how to replace the heating fan resistor on a Renault Scenic. To perform this operation, remove the lower part of the dashboard…
Replacement of the Cabin Heater Resistor on Renault Scenic 1
Renault Scenic (1996-2003 / ) In today's video, we will see the instructions on how to disassemble and replace the internal cabin heater resistor on a first-generation Renault Sce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos