Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

Remove the engine air filter on a Renault Megane: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the bonnet. Secure the bonnet with the prop rod. Remove the engine soundproofing panel, then open the air kit (unscrew the tightening screws of the hose), remove the cover of the filter box, and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the edges). Finally, refit the cover of the air box and tighten the screws.

Close the bonnet after maintenance.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Renault Megane 3
How to Replace the Engine Air Filter on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the engine of your Renault Megane Mk3 often overheats even at low revs, it is likely time to replace the air filter. In this guide, you will learn…
How to Replace the Air Filter on a Renault Megane 4
How to Replace the Air Filter on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) If the engine of your Renault Megane Mk4 is overheating unusually due to an old air filter, you need to replace it as soon as possible. Below, we wil…
How to Replace the Engine Air Filter on the Renault Megane 3
How to Replace the Engine Air Filter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If you intend to change the engine air filter of your Renault Megane third series yourself, simply follow the steps described below one by one. First…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos