Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Conditioning Resistor on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Air conditioning

Do you want to remove the air conditioning resistor on a Renault Scenic but don’t know how? Here’s how to remove the part: remove the trim surrounding the gear knob with a plastic lever; detach it from the centre console. Remove the plastic covering of the radio and the glove compartment (located on the right of the dashboard). Once the drawer is removed, use a screwdriver to unscrew the mounting screws on the sides of the cover plastic; disconnect and extract the ventilation resistor. To reassemble, follow the disassembly steps in reverse.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Renault Scenic
How to Replace the Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) How to replace the fan (air) resistor on a Renault Scenic? Follow these steps for disassembly. Remove the plastic cover under the front dashboard usi…
How to replace the heating resistor of a Renault Scenic
How to replace the heating resistor of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) This video tutorial shows the procedure to follow in order to replace the heating resistor of a Renault Scenic car. You will need a torx screwdriver,…
Replacement of the Cabin Heater Resistor on Renault Scenic 1
Renault Scenic (1996-2003 / ) In today's video, we will see the instructions on how to disassemble and replace the internal cabin heater resistor on a first-generation Renault Sce…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos