Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on a Renault Kangoo II

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: EGR valve

Let's see how to replace the EGR valve on the Renault Kangoo II, which can be found on eBay with code 266638331082 for £82.63, including free delivery. A malfunctioning EGR valve can lead to power loss, injection problems, and warning lights on the dashboard. Open the bonnet and remove the air intake duct, then take off the duct support and the engine cover support, sliding the duct out sideways (be careful if it is caked). Remove the three 8 mm screws (one at the back is a bit tricky), then disconnect the electrical connector and remove the valve, moving it sideways if it is stuck. Clean the duct before installing the new valve, then proceed with the installation, paying attention to the washer. Screw in the three screws and reconnect the electrical connector. Reattach the intake duct, hand-tighten the black duct, reassemble the turbo air duct support, and then the intake duct, and finally reassemble the rings and support screws.

Posted on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
Where is the OBD port of the Renault Kangoo 2?
Where is the OBD port of the Renault Kangoo 2?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To access the OBD port of your Renault Kangoo second generation, follow these steps. It only takes a few seconds to locate it. First, enter the vehic…
How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos