Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Renault Laguna 2

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

In today's video, we can see how to reset the service light on a Renault Laguna, second generation model. So, let's start the reset procedure by turning on the vehicle's ignition without starting the engine, then press the end button on the right stalk until the display shows the remaining kilometres until the next service.

Once done, press and hold the trip button on the speedometer until the service interval is reset as shown in the video.


Posted on 5 April 2026 by ScegliAuto


Related tutorials

How to reset the service light in the Renault Laguna?
How to reset the service light in the Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, you will see how to reset the service light in the Renault Laguna, a very simple and quick operation to perform only after completi…
How to reset the service light on the Renault Laguna?
How to reset the service light on the Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial we can see how to reset the service in the Renault Laguna, an extremely simple and quick operation, to be carried out only once all …
How to reset the service light on the Renault Laguna?
How to reset the service light on the Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, you will see how to reset the service light on the Renault Laguna 3. Before performing this simple operation, ensure you have compl…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos