Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Renault Clio 3?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

You can completely erase the Service light from the instrument cluster of the Renault Clio 3 by turning on the ignition and then pressing and holding the button located at the end of the lever to the right of the steering wheel. By holding this button for a few seconds, the Service light will flash and the maintenance interval will be reset. Once the interval has been reset, the Service light will be completely cleared, and you can release the button on the right lever. To verify that the reset was successful, you will need to turn off and then turn on the display again.

Posted on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos