Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to remove the right front door panel of a Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Door panel
Operation: How to remove the right front door panel of a Renault Megane

We remove the right front door panel of a Renault Megane. We disconnect the battery terminals in the engine compartment; with a screwdriver we unscrew the screws placed in the handle (after removing the plastic cover). We remove the plastic covering near the window, unscrew the screws left on the door panel and remove the clips fastening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door and reassemble the panel.


Posted on 17 November 2023 by ScegliAuto



How to remove the front door panel of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before starting, we will have to open the front door of our Renault Megane. Let's start by disengaging and removing the door panel inserts and covers
How to disassemble the front door panel of the Renault Megane.
Renault Megane (2015-2023 / Megane 4, Megane IV) Below we will see the main instructions that will allow us to disassemble and replace the front door panel of the Renault Megane. First, we open the
Disassembly of the door panel of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Let's see briefly the disassembly and replacement of the front door panel of the Renault Megane, following these simple steps. First of all, we open

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos