Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Before Changing the Diesel Fuel Pump of a Renault Diesel, Consider Another Approach

Model: Renault Renault Various
Part: Checks and maintenance

Video tutorial

This video provides excellent advice for all Renault diesel engine owners; it addresses a common issue that can be very costly. If the car struggles to start, especially when cold, and may lack power or go into the ECU protection mode, a hasty diagnosis might simply read an error from the ECU and suggest replacing the entire fuel pump, which can cost up to £2,000 depending on the model.

Before incurring this expense, in 10% of cases, it is worth checking this simple cause: the oil sump (or another nearby component) may be continuously rubbing against the wiring of the fuel pump pressure sensor due to engine vibrations; the insulation of the wires wears out, creating a short circuit, causing the ECU to receive incorrect data, limiting performance and simulating a pump failure.


Posted on 5 June 2026 by ScegliAuto


Related tutorials

Reliability of the Renault K9K 1.5 DCi 115 HP engine.
Reliability of the Renault K9K 1.5 DCi 115 HP engine.
Renault Renault Various In this video we see a propaganda film by Renault about the K9K 1.5 DCi engine with 115 hp. This is an extremely common engine, which is mounted not …
How to change the battery of a Renault Duster?
How to change the battery of a Renault Duster?
Renault Renault Various To change the battery of a Renault Duster, turn off the engine, remove the key, and open the bonnet. Locate the battery in the engine bay and remove …
How to Replace the AdBlue Module on a Renault Truck?
How to Replace the AdBlue Module on a Renault Truck?
Renault Renault Various Let's see how to replace the AdBlue pump module using the IDC5 software. First, connect the OBD cable to the vehicle's diagnostic socket, then open t…

Other guides you may be interested in

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos