Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the speaker of a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Door panel

Let's see how to remove the speaker of a Renault Clio after removing the door panel. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. We remove with a lever the plastic placed at the corner of the window; with a screwdriver we go to unscrew the tightening screws placed in the plastic handle and in the space of the door opening lever. Once all the screws have been removed: remove the window control panel and all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. Using a screwdriver, unscrew the screws that tighten the speaker recessed in the door (if there are rivets, remove them); we remove the same and disconnect the power supply terminal.


Posted on 18 November 2023 by ScegliAuto



Replacement of the front speaker of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today's main instructions will show us how to disassemble and replace the front door speaker of the Renault Clio. First, we open the front door and b
Remove the rear speaker on Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to change the rear door speaker? Let's see the disassembly of the speaker on Clio. Let's remove the plastic cover to access the speaker, let's se
How to replace the front speakers of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this guide, we will see step-by-step instructions that will allow us to disassemble and replace the front speakers of the Renault Clio. First of a

Other guides that may interest you

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos