Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument cluster

See other generations:
Video tutorial

Is the instrument cluster on your Renault no longer lighting up? Let's see how to remove it and change the bulbs or the entire unit. Remove the upper plastic part of the instrument cluster cover (without breaking the plastic clips) and detach it from the dashboard.

Unscrew the screws around the instrument cluster with a screwdriver. After removing the screws, pull the unit away from the dashboard and disconnect the power cable.

Install a new instrument cluster or replace the LEDs/bulbs in the existing one, then refit it. Reattach the instrument cluster with the screws and the upper cover.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Removing Air Vents on Renault Megane
Removing Air Vents on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replace the air vents on a Renault Megane. To remove, lever the top and bottom using trim tools (as shown in the video). Disconnect the air vents and…
Removing the Instrument Cluster from the Renault Megane
Removing the Instrument Cluster from the Renault Megane
Renault Megane (2002-2010 / Megane 2) Today, we will go through the steps to remove and replace the instrument cluster of the Renault Megane dashboard, following the instructions below. F…
How to Replace the Radio in a Renault Megane
How to Replace the Radio in a Renault Megane
Renault Megane (2002-2010 / Megane 2) Before starting, sit in the driver's seat of your Renault Megane. Begin by inserting the extraction keys into the holes on the front of the radio to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos