Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Instrument cluster

Today, we will go through the steps to remove and replace the instrument cluster of the Renault Megane dashboard, following the instructions below. First, get inside the vehicle and start by removing the plastic cover of the instrument cluster; then unscrew the screws of the cluster to completely remove it from the dashboard, disconnecting the electrical harnesses located at the back, as shown in the video. Now, if necessary, replace the instrument cluster with a new one; finally, reassemble everything by applying the reverse procedure!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Air Vents on Renault Megane
Removing Air Vents on Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Replace the air vents on a Renault Megane. To remove, lever the top and bottom using trim tools (as shown in the video). Disconnect the air vents and…
How to Remove the Display on a Renault Megane
How to Remove the Display on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to remove the onboard computer from your Renault Megane? Watch this video to see how to proceed with the disassembly: using a thin screwdriver or…
Removing the Instrument Cluster Display on a Renault Megane
Removing the Instrument Cluster Display on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will learn how to remove the display of the instrument cluster on a Renault Megane. First, get inside the car and use app…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - What does the wording "check the injection system" on the Renault Megane mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos