Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front and Rear Badge on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Manufacturer emblem

Tools needed: flat screwdriver, 4mm Allen key, 10mm spanner. A socket or ratchet with an extension is recommended. Front: detach by gently pulling from one side and the other, possibly using the flat screwdriver as leverage. Be careful not to break the clips that snap into the grille. Rear: unlike the front badge, this one is bolted from the inside. Use the Allen key to unscrew the bolt that secures the tailgate panel. Then gently pull and detach the panel. Locate the three nuts that secure the boot badge. Unscrew them to free the badge, which will detach completely with the cover shell.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Logo from a Renault Clio
How to Remove the Front Logo from a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, in this video tutorial, see how to remove and replace the logo or badge of the Renault Clio in simple and quick steps. First, open the bonnet …
How to Replace the Renault Badge on a Clio
How to Replace the Renault Badge on a Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) These brief and simple steps will illustrate the procedure for removing and replacing the badge of the Renault manufacturer on a Clio. First, open th…
Removing the Front Badge of the Renault Clio 4
Removing the Front Badge of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this guide, you will learn how to remove the badge or emblem of the manufacturer from the Renault Clio fourth series in simple steps. First, open …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos