Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light for Renault Trafic/Captur/Clio 2019

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

See other generations:
Video tutorial

To reset the service light, place the gear in neutral, and set the dashboard to pre-start mode, that is, with the card inserted and the display on, but crucially without starting the engine (only the dashboard on). Press the button at the top of the wiper stalk several times until the message "range under review" appears.

Hold the button continuously until "Maintenance due" appears, then release the top button and press it again.

The message will start to flash until the reset. Press the top button one last time.

Repeat the procedure and the light will turn off. Remove the card, reinsert it, and perform a test start.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Trafic
How to Reset the Service Light on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) In this guide, we will discover the instructions that will allow you to reset the ordinary maintenance (service) warning light on a Renault Trafic. F…
How to Reset the Service and Maintenance Light on a Renault Trafic
How to Reset the Service and Maintenance Light on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) The instructions in this guide will allow you to reset the ordinary maintenance service light on a Renault Trafic. First, get in the vehicle and turn…
How to Reset the AdBlue Warning Light on the Renault Trafic?
How to Reset the AdBlue Warning Light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) When the AdBlue warning light appears on the instrument panel of the Renault Trafic, it means that the additional fluid in the tank is almost deplete…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos