Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb on Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Light bulb

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the front headlamp bulb on a Renault Megane. First, open the bonnet and unscrew the screws of the headlamp.

Then, disconnect it and pull it slightly away to access the rear. Now, open the two tabs and remove the plastic protection cap of the bulbs.

Disconnect the electrical connector and unclip the last spring that holds the bulb in place; take it out and replace it with a new one. Now, reassemble everything following the video until the end!


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Megane RS
How to Replace the Front Headlamp Bulb on a Renault Megane RS
Renault Megane (2008-2015 / Megane III, Megane 3) In this new mini guide for all Renault Megane RS owners, discover how to correctly replace the front headlamp bulb. First, ensure you purchase a new …
How to Change the Front Headlamp Bulb on a Renault Megane
How to Change the Front Headlamp Bulb on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Discover in this guide how to remove and replace the front headlamp bulb on a Renault Megane by following these simple and quick steps. First, open t…
How to Replace the Front Headlamp Bulb of the Renault Megane
How to Replace the Front Headlamp Bulb of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) This guide outlines the procedure for removing and replacing the front headlamp bulb of the Renault Megane. First, open the bonnet of the vehicle and…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos