Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Tail light

See other generations:
Video tutorial

How to remove the rear light from a Twingo? Lift the cover of the luggage compartment and locate where to remove it. Unscrew the securing screws located at the side of the light. Remove the rear light from its housing once the screws are removed.

Disconnect the electrical connectors from behind the rear light. Install the bulb holder with the bulbs in the rear light (replace them if damaged), reconnect the electrical connectors to the rear light, and screw in the screws.

Close the tailgate, turn on the ignition, and operate the headlight switch. Check the operation of the headlight bulbs.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Renault Twingo
How to Replace the Front Headlight Bulb of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) If you own a first generation Renault Twingo (1993-2007) and want to know how to replace the front headlight bulb, you are in the right place. Below,…
Replacing the Front Headlamp Bulb on Renault Twingo 3
Replacing the Front Headlamp Bulb on Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Today, you will see how to remove and replace the front headlamp bulb on a second-generation Renault Twingo. First, open the bonnet and remove the ru…
How to Replace the Headlight Bulbs on a Renault Twingo?
How to Replace the Headlight Bulbs on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) As shown in this tutorial, replacing the headlight bulbs on a Renault Twingo is an extremely simple and quick operation. First, ensure the key is not…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos