Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor in a Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

Start by removing the side covers of the glove compartment and open the glove box door. Next, unscrew and remove the six screws that you have uncovered.

This will give you access to the resistor. Proceed to disconnect the connector attached to it. Once the connector is disconnected, you can pull the resistor out of its housing.

This way, you will have removed the faulty resistor. To fit the new resistor and close everything up, simply follow these instructions in reverse.

Once you have fitted the new resistor and closed everything up, you will have successfully completed the replacement.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
How to Replace the Fan Resistor on a Renault Megane
How to Replace the Fan Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to t…
Removing the Fan Resistor on Renault Megane
Removing the Fan Resistor on Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the air fan resistor on your Renault Megane damaged? Here’s how to replace it. Open the front door (passenger side) and remove the trim: use a lev…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos