Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Interior fan replacement on Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Blower motor

To access the passenger compartment fan you will have to work in the lower part of the glove box, then on the front passenger side. Then remove the bulkhead located under the compartment itself but towards the central tunnel, as shown in the video. Then, using a small flat screwdriver or a wedge of plastic, lever and remove the plastic side of the compartment itself, the one that gives the window and where you can see the symbols of the airbag. Also remove the glove box by levering the plastic and unscrewing the side and top screws. Now you can finally remove the fan, you just need to unscrew the screws and remove the connector.

Posted on 7 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio 3 interior fan repair and disassembly
Renault Clio 3 interior fan repair and disassembly
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's see in this video how to repair the passenger compartment fan of a Renault Clio third series. First of all, let's first disconnect the two batt…
Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
How do you replace the cabin fan of the Renault Clio?
How do you replace the cabin fan of the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The cabin fan installed on board the Renault Clio can be reset by opening the glove compartment located on the passenger side: you will need to loose…

How to Change the Side Mirror on a Ford Mondeo

To perform this operation, it is advisable to disconnect the battery cables to protect any delicate circuits, such as the one controlling the mirror adjustment motor. Now, proceed to remove the triangular panel covering the bolts securing the mirror. To do this, unscrew the bolt located in the designated hole, then disconnect the connector supplying the motor. After that, unscrew the bolts to detach the mirror and remove it from the exterior. Reverse the steps described for reassembly.

Watch the video!


by ScegliAuto

More videos