Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Display Replacement on Renault Scenic 2

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Instrument cluster

See other generations:
Video tutorial

Hello everyone! Today, you will learn how to easily remove and replace the display of the instrument cluster on a Renault Scenic 2. Using a small flat screwdriver or a plastic lever (not metal, as it will scratch everything!), pry and remove the upper part of the dashboard plastics, as shown in the video.

Unscrew the two side screws and finally disconnect the connectors.

Voila! The job is done. As you will agree, for reassembly, simply connect the connectors to the new displays and insert them back into place, then screw in the screws and ensure it is securely fitted.

Good luck!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Renault Scenic 4.
How to replace the air filter of the Renault Scenic 4.
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) If you don't know how to replace the engine air filter of your Renault Scenic Mk4, don't worry because with the procedure described below, you will b…
How to Replace the Instrument Cluster Bulb in a Renault Scenic?
How to Replace the Instrument Cluster Bulb in a Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the instrument cluster bulb in a Renault Scenic, you must completely remove the instrument cluster from its housing. Once the cluster is r…
Replacing the Dashboard on a Renault Scenic
Replacing the Dashboard on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The following video demonstrates how to remove and replace the dashboard and windscreen on a Renault Scenic. This procedure requires careful attentio…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos