Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Replacement wipers on Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Windscreen wipers
Operation: Replacement wipers on Renault Scenic

Let's start with the rear wiper: detach the wiper arm from the glass. Press the central hook and remove the brush from the arm. To mount the new blade, simply insert it into the arm and bump it against the windshield. Let's move on to the front windshield: also here raise the wiper arm, then rotate the blade ninety degrees and, in this way, remove it by sliding it out of the coupling. Insert the new brush rotated perpendicular to the arm and once it is well inserted, turn it in the same direction as the arm itself.


Posted on 1 January 2024 by ScegliAuto




Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Today's steps will show us how to dismantle and replace the front wipers of the Renault Scenic, following the instructions below. First, lift the wip
How to change the windshield wipers of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Hi, in this video we will see how to replace the windshield wipers of a Renault Scenic in a practical and fast way. First you have to open the hood f
Renault Scenic 1.5 DCi EGR valve replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video tutorial we will see how to remove and replace (or clean) the EGR valve of a Renault Scenic 1.5 DCi. First we open and lift the bonnet

    Frequently Asked Questions

    • Scenic 2009-2015 - How to replace the rear wiper arm in the Renault Scenic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos