Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of car radios on Renault and Dacia cars

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Car stereo

To disassemble the radio on a Renault or Dacia car before the various on-board computers, simply follow this very simple procedure: insert the special double needles into the four holes in the corners of the radio, until you reach the end of the stroke. When you have done this and you feel that you have reached the bottom, pull the two needles at the same time and take out the radio. At this point you just need to disconnect the antenna cable and the connector through the special tab, pass these cables into the frame of the new car radio and connect them to it, finally insert it in its seat. Good work!

Posted on 10 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car stereo on the Renault Twingo 1
How to remove the car stereo on the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) Let's see in this video the step by step instructions that will allow us to disassemble the original car radio on the Renault Twingo first generation…
Where are the fuses located in the Renault Twingo?
Where are the fuses located in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) On the Renault Twingo, fuses are contained within specific fuse boxes that are installed on the vehicle: on this type of car, it is possible to locat…
How to replace fuses on Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) On Renault Twingo 1 series there are two fuse boxes, one inside the passenger compartment and the other in the engine compartment. The one inside is …

Other guides you may be interested in

How to Remove the Interior Light of a Mini

Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining), pull the cover out from the panel and disconnect the power connector after removing it. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push it in with your hands until the metal clips are fully locked). Test the light's functionality before completely refitting the piece.

Watch the video!


by ScegliAuto

More videos