Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Maintenance Light on a Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Warning light – error code

How do you reset the maintenance light on a Clio? Here’s how to turn off the light. Turn on the vehicle's instrument panel: use the ignition key. You need to press the button located above the instrument cluster. Turn off the vehicle's instrument panel, press the button firmly, and turn the panel back on. Wait for the maintenance light to turn off completely. Check the instrument panel by turning it off and on again with the ignition key. Verify on the information display of the instrument panel if there are any abnormal warning lights.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) These short and simple steps will show us how to reset the multimedia system, performing a forced shutdown, on the Renault Clio, but also on the Capt…
Renault Clio (1998-2005 / Clio 2, MK 2) The service light reset on the Renault Clio 2 1.5 dci is extremely simple, but it is important to remember that this operation should only be done af…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To reset the service light on a Renault Clio, start by turning on the ignition without starting the engine. Observe the spanner warning light; to res…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What are the dashboard indicators on the Renault Clio? Read answer
    • Clio 2005-2013 - How do you get the Renault Clio N585 serial number car radio code? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos