Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on the Clio 2 1.5 dci?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Service warning light

See other generations:
Video tutorial

The service light reset on the Renault Clio 2 1.5 dci is extremely simple, but it is important to remember that this operation should only be done after completing all scheduled maintenance tasks, such as oil changes, filters, spark plugs, and so on. Here is how to reset it: turn on the instrument panel, press and hold the button located under the odometer on the left, wait for the reset option to appear, release the button and press it again to authorize the reset.

Once the light turns off, release the button and turn off the instrument panel.


Posted on 29 March 2025 by ScegliAuto


Related tutorials

How to reset the AdBlue refill warning light on the Renault Clio 1.5 dCi.
How to reset the AdBlue refill warning light on the Renault Clio 1.5 dCi.
Renault Clio (2019-2026 / Clio V, Clio 5) Let's discover the instructions that will allow us to reset the AdBlue refill warning for the Renault Clio 1.5 dCi. First of all, it is necessary to …
How to Reset the Service Light on Renault Clio 1.5 dCi
How to Reset the Service Light on Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To reset the oil change service indicator on the Renault Clio dCi, proceed as follows: open the door and access the driver's seat, insert the ignitio…
How to replace the starter motor on a Renault Clio 1.5 dCi
How to replace the starter motor on a Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos