Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulbs on Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Headlight bulb

Lift the bonnet and insert the support rod. Replacing the front headlight bulbs is very simple: for most of them, just remove the rear cover (inside the bonnet), disconnect the connector, and open the metal clip to extract the bulb and replace it with a new one. For the side lights, there is no metal clip; you just need to pull the connector and replace the bulb. The same applies to the indicator lights, which also do not have a rear cover to remove.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Renault Twingo
How to Replace the Front Headlight Bulbs on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) How do you replace the front headlight bulbs on a Renault Twingo? Open the front bonnet by pulling the lever located at the bottom left of the dashbo…
How to Replace the Headlight Bulbs on a Renault Twingo?
How to Replace the Headlight Bulbs on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) As shown in this tutorial, replacing the headlight bulbs on a Renault Twingo is an extremely simple and quick operation. First, ensure the key is not…
How to Replace the Front Headlight Bulbs in a Renault Twingo?
How to Replace the Front Headlight Bulbs in a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will see how to replace the front headlight bulbs in a Renault Twingo, a very simple and quick operation. First, ensure that th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos