Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on a Renault Captur 1.5 DCI

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, we will see how to remove and replace the diesel filter on a Renault Captur 1.5 DCI, first series. Start by lifting the vehicle, even just from the front right side, and remove the wheel arch liner; to do this, remove all the securing clips using pliers.

Now access the diesel filter; unscrew the securing nuts of the bracket and disconnect the two fuel inlet and outlet pipes. Finally, disconnect the electrical connector to remove it, allowing the fuel inside to drain; then replace it with the new one!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Renault Captur?
How to Replace the Diesel Filter in the Renault Captur?
Renault Captur (2013-2019 / MK 1) In this tutorial, we will see how to replace the diesel filter in the Renault Captur, a very simple and quick operation. First, lift the front right …
How to Replace the Glow Plugs on a Renault Captur 1.5 DCi
How to Replace the Glow Plugs on a Renault Captur 1.5 DCi
Renault Captur (2013-2019 / MK 1) In this brief video tutorial, learn how to replace the engine glow plugs on a first-generation Renault Captur, produced from 2013 to 2019. Start by o…
Oil and Fuel Filter Replacement on Renault Captur
Oil and Fuel Filter Replacement on Renault Captur
Renault Captur (2013-2019 / MK 1) After removing the four fixing bolts of the engine splash guard, use a square spanner size 8 to drain the engine oil. Once the used oil is collected,…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos