Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel and Window Regulator Motor on Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Door trim panel

In today's video, we will see how to remove the door panel and the window regulator motor on a second-generation Renault Megane, following these simple steps. First, open the front door and unscrew the screws of the door panel; you will find them on the door handle and under the plastic cover of the grab handle. After removing all the plastics from the panel and unscrewing all the screws, disconnect the electrical connector of the window buttons and unscrew the side screws of the panel, then remove it. Finally, remove the window regulator motor, following the video to the end!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Electric Window Motor from a Megane
Removing the Electric Window Motor from a Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Is the electric window motor on your Megane damaged? Here’s how to remove the part from inside the car door. Before starting the disassembly, disconn…
How to Remove the Door Panel on a Renault Megane
How to Remove the Door Panel on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you remove the door panel on a Renault Megane? Let's look at the removal of the right door panel. Before starting, disconnect the battery term…
How to Remove the Door Panel from a Renault Megane
How to Remove the Door Panel from a Renault Megane
Renault Megane (2002-2010 / Megane 2) Before starting, open the door of your Renault Megane. Begin by disengaging and removing the insert of the door panel with the window switch using a …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos