Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Removing the door and window panel on Renault Megane 3

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Door panel
Operation: Removing the door and window panel on Renault Megane 3

We see in this video the disassembly of the front door panel and the repair of the front window on a third generation Renault Megane. First of all we open the front door and we go to remove the plastic covers that we find on the panel, starting from that of the grip handle; then unscrew the screws that we find below, using a torx screwdriver, and remove the plastic caps that we find on the panel, unscrewing the additional fixing screws that we find below. At this point we pry the sides of the panel to remove it; then disconnect the electric connector of the windows and the cable of the handle. Follow the video to the end for window repair!


Posted on 25 January 2024 by ScegliAuto



Removing the door panel and window motor on Renault Megane 2
Renault Megane (2002-2010 / Megane 2) In today's video we will see the disassembly of the door panel and the power window motor on a second series Renault Megane, following these simple s
Removal of the front window of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Today we will see, in this short video, how to remove and replace the front window and the adjustment mechanism of the Renault Megane third series. F
Disassembly of the door panel of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Let's see briefly the disassembly and replacement of the front door panel of the Renault Megane, following these simple steps. First of all, we open

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos