Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Remove the Boot Lock on Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Door lock

Today, you will see the main instructions for removing the tailgate lock from the boot of a Renault Clio second series. First, open the rear tailgate and remove the panel by unscrewing the fixing screws using a T20 Torx screwdriver; then disconnect the electrical connector of the electric lock and unscrew the three fixing nuts to remove the entire mechanism. At this point, you can extract the lock by removing the logo from the outside; finally, refit everything by applying the reverse procedure of disassembly!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open a Stuck Boot Lid on a Renault Clio
How to Open a Stuck Boot Lid on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows the emergency steps to open the stuck rear boot lid of a Renault Clio in case of a lock failure. First, open the rear doors and star…
Removal and Replacement of the Boot Release Button on a Renault Clio
Removal and Replacement of the Boot Release Button on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, you will learn how to remove and replace the boot release button on the rear tailgate of the Renault Clio. First, open the ta…
What to do if the tailgate of the Renault Clio gets stuck?
What to do if the tailgate of the Renault Clio gets stuck?
Renault Clio (1998-2005 / Clio 2, MK 2) In the Renault Clio, it can happen that the tailgate gets stuck, for example, due to a fault in the lock or the switch located in the cabin. In this …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos