Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the steering wheel on Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Steering wheel

We see the disassembly of the steering wheel on a Renault twingo with disassembly of the airbag. Using a socket wrench or screwdriver, unscrew the tightening screws located behind the steering wheel cover (where the airbag is present). Once the airbag (driver's side) has been released, disconnect the power supply terminals and extract it from the steering wheel. We unscrew the screw in the center of the steering wheel and remove the same. We fix a new steering wheel above the barrel, connect the clamps of the airbag power supply, then, we press the same on the steering wheel with our hands and at the same time we screw the clamping screws into the rear of the steering wheel.

Posted on 26 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Renault Twingo steering wheel
Replacement of the Renault Twingo steering wheel
Renault Twingo (1993-2007 / Twingo 1) Let's briefly see in this guide the steps that will allow us to disassemble and replace the steering wheel of the Renault Twingo. First, we open the …
Guide to disassembling the airbag and steering wheel of the Renault Twingo
Guide to disassembling the airbag and steering wheel of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Let's briefly see in this guide the steps that will allow us to disassemble the airbag and the driver's steering wheel of the Renault Twingo. First w…
How to remove the steering wheel of the Renault Twingo
How to remove the steering wheel of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Let's see in this short and simple guide how to remove and replace the Renault Twingo steering wheel, following the instructions below. First we open…

Other guides you may be interested in

How to Remove the Interior Handle of a BMW 3 Series

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.

Watch the video!


by ScegliAuto

More videos