Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change Fuel Pump on Renault Cars

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuel pump

See other generations:
Video tutorial

Before locating the fuel pump on Renault cars, take some precautions: lift the bonnet and secure it with the prop rod, disconnect the battery, and seal the access from the carburettor to the engine (to do this, you must first remove the sound insulation panel from the engine).

Once done, we can proceed to the fuel pump: it is located under the rear seats on Renault cars and others.

Remove the boot carpet after taking everything out, unscrew the bolts securing the seats, and slide them out through the boot. Disconnect the pump hoses and clamps, and extract it from its housing.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump in a Renault Kangoo
Replacing the Fuel Pump in a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this guide, we will discover the instructions that will allow us to remove and replace the fuel pump in a Renault Kangoo. First, open the rear doo…
Replacing the Water Pump on the Renault Kangoo 1.6 16V
Replacing the Water Pump on the Renault Kangoo 1.6 16V
Renault Kangoo (1997-2008 / KC, MK 1, KW) Today's main instructions will show you the procedure for removing and replacing the water pump and timing belt on the Renault Kangoo 1.6 16V. First,…
How to Replace the Fuel Pump on the Renault Kangoo
How to Replace the Fuel Pump on the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) To replace the fuel pump on the Renault Kangoo, open the rear compartment to locate the circular cover in the centre. Once this cover is removed by l…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Where is the fuel pump located in the Renault Kangoo? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos