Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the EGR Valve on a Renault Clio 4 1.5 DCI

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: EGR valve

Using a ratchet, extension, and 10 mm socket, loosen the screw of the intercooler duct, then remove the metal clip with a screwdriver. Plug the holes with clean rags to prevent dirt from entering. Move the turbocharger valve by unscrewing the single nut that holds it in place. With a 10 mm socket spanner, unscrew the bolts securing the EGR and take care not to lose the gasket. At this point, you can clean it or replace it: reassembly is done in reverse order. If you wish to clean it, use a cleaning product, as shown in the video, along with a brush and a cloth.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The EGR valve on the Clio III 1.5 dCi tends to clog with carbon, causing a loss of power and engine warning light. To clean it, remove the intake man…
How to Clean the EGR Valve of a Clio 3 1.5 dCi
How to Clean the EGR Valve of a Clio 3 1.5 dCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) As shown in the video, open the engine bay of your Renault Clio 3 1.5 dCi and remove the engine cover. At this point, you will see the EGR valve conn…
How to Replace the EGR Valve on the Renault Clio 1.5 dCi?
How to Replace the EGR Valve on the Renault Clio 1.5 dCi?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the EGR valve on the Renault Clio 1.4 dCi, open the bonnet to access the engine compartment. The valve is located at the top of the engine…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos