Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Track Rod Ends on a Renault Twingo?

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Brake drums and shoes

See other generations:
Video tutorial

To replace the track rod ends on a Renault Twingo, it is necessary to lift the car and loosen the bolts securing the wheel, using a pneumatic gun. After removing the wheel, measure before starting to remove the track rod end: the bolts should be loosened from both ends.

Once these are removed, you can slide off the track rod end and lubricate all other parts.

At this point, you can insert the new track rod end and reassemble all previously removed parts. This operation should be performed on both sides.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Light Switch Lever on a Renault Twingo
How to Replace the Light Switch Lever on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before you begin, sit in the driver's seat of your Renault Twingo. Start by removing the steering column cover by unscrewing the fixing screws. Next,…
Replacing the Battery of the Renault Twingo 1.2
Replacing the Battery of the Renault Twingo 1.2
Renault Twingo (1993-2007 / Twingo 1) Follow these instructions to remove and replace the engine battery of the Renault Twingo 1.2. First, open the bonnet of the vehicle and disconnect bo…
Where is the OBD Port on the Renault Twingo 3?
Where is the OBD Port on the Renault Twingo 3?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) If you don't know where the OBD port is located on your Renault Twingo third series, don't worry as this guide provides all the steps you need to qui…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos