Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Brake Light on a Renault Laguna?

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Tail light

This video tutorial explains the steps to remove and replace the side brake light bulb on a Renault Laguna. First, open the boot and, using the handle found on the side, open the compartment (the right one for changing the right brake light and the left one for changing the left brake light). Once done, open a smaller second panel and unscrew the screws that will allow you to remove, pull out, and disconnect the rear light unit. At this point, simply unscrew the old bulb and fit the replacement. To reassemble everything, follow the same steps in reverse order.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on a Renault Laguna 3?
How to Change the Front Brake Pads on a Renault Laguna 3?
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this video, you will see how to remove and replace the front brake pads on a third-generation Renault Laguna. First, lift the vehicle and remove t…
How to Adjust the Handbrake on a Renault Laguna
How to Adjust the Handbrake on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) This guide provides the main instructions on how to adjust the handbrake cable on a Renault Laguna. First, get inside the vehicle and start by removi…
How to Remove the Brake Disc on a Renault Laguna SW
How to Remove the Brake Disc on a Renault Laguna SW
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this guide, learn how to remove the brake disc along with the brake pads on a Renault Laguna. First, lift the car on a column lift to the desired …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos