Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the words "Anti-skid activated" on the Renault Clio display mean?

Model: Renault Clio MK 4, Clio 4, Clio IV - Years 2012-2019
Part: Instrument cluster

If the message "Anti-skid activated" appears when inserting the key card in its seat and pressing the ignition button on the Renault Clio, the most likely cause is that the car battery is flat. In addition to this wording, the message "Brake circuit failure" may also appear, as happens in the video. Other messages that indicate insufficient battery charge are "Power steering failure" and "ABS check". To prevent these error messages from appearing again, it may be necessary to replace the battery with a new one or simply recharge it.

Posted on 22 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the active skid warning on the Renault Clio
How to deactivate the active skid warning on the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today's guide will show us how to disable the active traction control light on the Renault Clio, as well as the Captur, following the instructions be…
How is the Start & Stop of the Renault Clio activated?
How is the Start & Stop of the Renault Clio activated?
Renault Clio (2019-2026 / Clio 5, Clio V) In order to activate and deactivate the Start & Stop system of the Renault Clio there is a special button on the central dashboard that depicts an A …
How to reset the warning light of the anti-pollution system in the Renault Clio?
How to reset the warning light of the anti-pollution system in the Renault Clio?
Renault Clio (2019-2026 / Clio 5, Clio V) The anti-pollution system in the Renault Clio 5 is made up of a liquid called AdBlue which, when sprayed into the exhaust system, reduces the emissio…

Other guides you may be interested in

Removing the Door Panel on a BMW Z3

Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the door panel (disconnect the connector), unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel away by hand and disconnect it from the door (disconnect the power wiring and the opening cable if present on the model). Perform the desired maintenance inside the door. Refit the panel after maintenance.

Watch the video!


by ScegliAuto

More videos