Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the active skid warning on the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

Today's guide will show us how to disable the active traction control light on the Renault Clio, as well as the Captur, following the instructions below. So, by turning on the ignition, the traction control light appears on the small display of the instrument panel; we then turn off the ignition and open the hood of the car. At this point, we disconnect both battery terminals and wait a couple of minutes before reconnecting them; this way we will reset the control unit, which may solve the issue with the active traction control.

Posted on 12 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, you will learn how to disable the seatbelt alarm on the Renault Clio model 4. Open the OBD2 port cover and insert the connector that you will …
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to deactivate the traction control of the Renault Clio, you need to connect a diagnostic tool to the OBD port of the vehicle. Once the conne…
Renault Clio (1998-2005 / Clio 2, MK 2) In order to replace the anti-theft alarm of the Renault Clio, you need to program the car's ECU to ensure that this system is no longer active. To do…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos