Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulb on a Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fog lights

In this tutorial video, you will see how to remove and replace the front fog light bulb on the second series Renault Clio in simple steps. First, remove the front wheel arch liner by unscrewing the fixing screws; then, remove the plastic cover located under the bumper, as illustrated in the video. At this point, unscrew the screws of the front fog light to remove it; disconnect the electrical connector and replace the bulb with a new one of the correct type. Finally, reassemble everything!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight and bulb of the front fog light of the Renault Clio
How to replace the headlight and bulb of the front fog light of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short guide, we will see the instructions necessary to disassemble and replace the front fog light and bulb of the Renault Clio. First, move …
How to replace the fog light bulb on the Renault Clio?
How to replace the fog light bulb on the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the fog light bulb on the Renault Clio, you need to remove the wheel corresponding to the fog light being replaced, along with the corresp…
How to disassemble the rear fog light of the Renault Clio.
How to disassemble the rear fog light of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos