Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Tyre Pressure on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

A common issue with any car is resetting the tyre pressure, and to resolve this on a Renault Clio, follow a simple procedure. First, check and adjust the tyre pressures to the manufacturer's recommended values.

For the first step, switch the ignition system to the Start position but do not start the engine. Insert the card and press the start button.

Use the "Up" and "Down" buttons on the onboard computer to navigate the Menu. Find "Set TPW" or "Memorize tyre" in the onboard Menu. Now press and hold the "Up" button for a few seconds until a new message appears. When you receive the new message, release the button and wait a few seconds for the car to store the new pressure values.

Done! Now you can switch the ignition lock system to the off position.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Renault Clio.
How to reset the tire pressure warning light on the Renault Clio.
Renault Clio (2019-2026 / Clio V, Clio 5) We will briefly see the instructions that will allow us to reset the tire pressure warning light on the Renault Clio. Before resetting the TPMS senso…
How to Reset the Tyre Pressure Light (TPMS) on a Renault Clio
How to Reset the Tyre Pressure Light (TPMS) on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today, we will see how to reset the tyre pressure light (TPMS) on a Renault Clio; before performing the reset, ensure all four tyres are at the corre…
How to Reset the Tyre Pressure on a Renault Clio 4
How to Reset the Tyre Pressure on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This brief tutorial shows how to reset the tyre pressure on a Renault Clio, fourth generation model produced from 2012 to 2019. First, turn on the ig…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos