Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Cabin Filter and Cleaning Air Conditioning System

Model: Renault Scenic Scenic 2, MK 2 - Years 2003-2009
Part: Cabin air filter

Open the car's bonnet. The filter is located just below the windscreen and access is through a flap found in the engine compartment. Turn the two levers to the left to open the flap and extract the filter. For cleaning the air conditioning system, obtain the appropriate aerosol can. Take the plastic tube and insert it into the hole located at the bottom of the glove compartment on the passenger side. Spray the contents and then turn on the air conditioning to maximum level for a few minutes. After this procedure, replace the new filter in its housing and close the flap.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you use the air conditioning system of the Renault Scenic?
How do you use the air conditioning system of the Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) In order to use the air conditioning system of the Renault Scenic, you need to insert the ignition key into the slot, so that you can turn on the ins…
Replacement of the cabin air filter of the Renault Scenic
Replacement of the cabin air filter of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To ensure a circulation of always clean air in the air conditioning system of the Renault Scenic, we must periodically replace the dedicated filter. …
How to replace the cabin air filter of the Renault Scenic 3
How to replace the cabin air filter of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the cabin air filter of the Renault Scenic model 3, we need to disconnect the vehicle's battery. To do this, we need to open the front hoo…

Other guides you may be interested in

How to Replace the Alternator on an Opel Meriva

First, release the bonnet from the lever and lift it. Disconnect the battery to protect your electronic devices. Now locate the alternator position on your vehicle. Remove the belt by unscrewing the tensioner pulley to take it off. You can now remove the bolts securing the alternator. Working on the rear of the alternator, disconnect the cables and pipes attached at the back. This allows you to extract the alternator from your vehicle and carry out the necessary work.

Watch the video!


by ScegliAuto

More videos