Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Lights on the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: License plate light

In this video tutorial, you will see how to remove and replace the number plate bulbs on the Renault Scenic in simple and quick steps. First, move to the rear and start by prying open the side slot of the light unit to remove the number plate bulb, as illustrated in the video. Next, remove the bulb from the light unit and replace it with the correct new one; insert it properly and check its operation before reassembling. Now proceed to replace the other number plate light in the same way!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Light from a Renault Scenic
How to Remove the Number Plate Light from a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Is the number plate light on your Renault Scenic not working anymore? Let's see in this video how to replace the damaged bulb. Open the boot lid, and…
How to replace the number plate lights with LED ones on a Renault Scenic?
How to replace the number plate lights with LED ones on a Renault Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) Let's see how to replace the number plate lights with LED ones on a Renault Scenic: start by removing the lamp holder located on the tailgate, just a…
How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos