Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

In this video, discover how to reset the service message on a Renault Megane 3. Navigate using the buttons on the lever behind the steering wheel, as shown at 0:20. By navigating through the menu, you will reach the "Service required" message; at this point, press the button with the down arrow, as shown at 0:25. Hold it down for about 10 seconds until the message is replaced by the new countdown of remaining miles. You can then release the button and switch off the ignition. When you turn it back on, the service message will be reset.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane 4, Megane IV) This guide outlines how to reset the service light for the routine maintenance oil change on the Renault Megane. First, get into the vehicle and turn…
Renault Megane (2002-2010 / Megane 2) Before following this procedure, ensure that the service has been completed. Resetting the service light on the Renault Megane 2 is very simple. Inse…
Renault Megane (2002-2010 / Megane 2) The video shows how to reset the service light on a Renault Megane second generation. This is a very simple DIY operation that can be done in a few m…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos