Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter in the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Diesel fuel filter

In this tutorial we can see how to replace the diesel filter in the Renault Captur, a very simple and fast operation. First we lift the right front of the vehicle, remove the wheel, the wheel arch and unscrew the protective plate nuts with a 10mm socket wrench. Next, we place a fuel container under the filter, disconnect both hoses, the lower and upper sensor connector. At this point we can open the housing using the special tool supplied and proceed with the replacement, following the reverse procedure to reassemble everything.

Posted on 23 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace a diesel filter on Renault Captur 1.5 DCI
How to replace a diesel filter on Renault Captur 1.5 DCI
Renault Captur (2013-2019 / MK 1) Let's see in this video how to remove and replace the diesel filter on a Renault Captur 1.5 DCI, first series. First of all we go to lift the car, ev…
How do you replace the diesel filter on the Renault Captur?
How do you replace the diesel filter on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to replace the diesel filter of the Renault Captur you have to go and lift the car, so that you can go and loosen the bolts that secure the …
How to replace the diesel filter on the Renault Captur
How to replace the diesel filter on the Renault Captur
Renault Captur (2013-2019 / MK 1) In this video we show you how to replace the diesel filter of the Renault Captur. To begin with, make sure the engine is off and the handbrake is on.…

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos