Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Captur
  6. : How to replace the diesel filter on the Renault Captur

Renault Captur - Video tutorial

Model: Renault Captur MK 1 - Years 2013-2019
Part: Diesel filter
Operation: How to replace the diesel filter on the Renault Captur

In this video we show you how to replace the diesel filter of the Renault Captur. To begin with, make sure the engine is off and the handbrake is on. Then lift the car and remove the right front wheel to access the filter. After placing the car on a stand, remove the front right fender. With a socket wrench and a 10 insert, unscrew the three screws that hold the metal plate that protects the filter. Put a collection container to recover the diesel oil that drains from the filter. Now detach the straw and the electrical collector from the top of the filter. Now proceed to assemble the new filter by repeating the operations in reverse.


Posted on 27 September 2022 by ScegliAuto



How do you replace the diesel filter on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to replace the diesel filter of the Renault Captur you have to go and lift the car, so that you can go and loosen the bolts that secure the
How do you replace the diesel fuel filter of the Renault Captur?
Renault Captur (2013-2019 / MK 1) In order to replace the diesel filter of the Renault Captur, you need to lift the car so that you can loosen the bolts securing the left rear wheel.
How to replace a diesel filter on Renault Captur 1.5 DCI
Renault Captur (2013-2019 / MK 1) Let's see in this video how to remove and replace the diesel filter on a Renault Captur 1.5 DCI, first series. First of all we go to lift the car, ev

    Frequently Asked Questions

    • Captur 2013-2019 - Where is the fuel filter of the Renault Captur located? Read Answer
    • Captur 2013-2019 - How much does the diesel filter cost in the Renault Captur? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos