Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Warning light – error code

To reset the service light on the Renault Scenic, start by inserting the card and turning on the instrument cluster. Use the lower button at the end of the wiper control stalk, pressing it until the display shows "service in". Hold the same button (at the bottom of the wiper control stalk) until the new mileage appears on the onboard computer display, then you can start the engine. Once the car is on, press the same button to check if the new mileage is confirmed.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Scenic?
How to reset the service light on the Renault Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this tutorial we can see how to reset the service in the Renault Scenic, an extremely simple and quick operation, to be carried out only once all …
How to Reset the Service Light in a Renault Scenic?
How to Reset the Service Light in a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this tutorial, you can see how to reset the service light in a Renault Scenic, a very simple and quick operation, to be performed only after compl…
How to Reset the Service Light on the Renault Scenic?
How to Reset the Service Light on the Renault Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) .. In this tutorial, you will learn how to reset the service light on the Renault Scenic, a very simple and quick operation to perform only.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos