Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on a 2011 Renault Megane Grand Tour

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

In this mini guide for the 2011 Renault Megane Grand Tour, discover how to correctly reset the maintenance light without using an external diagnostic tool. First, insert the smart key and turn on the instrument panel. Next, press the upper button located at the end of the right steering column multiple times until you see the maintenance message on the dashboard display. At this point, hold down the same button and release it as soon as the reset is complete.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) To reset the Service light on the Renault Megane, turn on the instrument cluster by turning the key in the ignition switch. Once powered on, navigate…
Renault Megane (2002-2010 / Megane 2) Today, see how to reset the service light for the engine oil change on the Renault Megane. First, get inside the vehicle and turn on the instrument c…
Renault Megane (2008-2015 / Megane III, Megane 3) How to reset the service light on your Renault Megane. Enter the vehicle and turn on the instrument panel with the key. Press the button located near…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos