Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on the Renault Megane 4

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Warning light – error code

To manually reset the maintenance light that appears on the instrument cluster of your Renault Megane Mk4, follow these steps. The entire procedure is straightforward and takes just a few seconds. First, press the "Engine Start-Stop" button to turn on the ignition. Then, use the up and down arrow buttons (located on the right side of the steering wheel) to scroll through the onboard menu and find the maintenance option. Finally, press and hold the "OK" button and release it as soon as the display stops flashing.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) In this video, learn how to reset the service light on your Renault Megane. Turn on the ignition with the key. Press the button located near the stee…
Renault Megane (2008-2015 / Megane III, Megane 3) In today's video, we will see how to reset the service light on a Renault Megane. First, ensure that you perform the maintenance recommended by the m…
Renault Megane (2008-2015 / Megane III, Megane 3) Reset the maintenance light on a Renault Megane. Enter the cabin and turn on the instrument panel: check the maintenance light on the dashboard. Pres…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos