Do it yourself
Frequently asked questions about cars and motorcycles

Hidden Menu on the Renault Megane Radio

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015

To find the hidden menu on the Renault Megane radio: Press buttons 2 and 4 to access the speaker test. Each speaker will make a test sound, while the display will indicate which speaker is being tested. Pressing buttons 1 and 6 accesses details about the tuner operation. With buttons 1 and 5, you access diagnostic details; buttons 1 and 2 provide details about the tuner software and the CD. Turn off the radio, press button 3, and turn on the ignition: the button test will begin. Press each button to pass the test: if everything is fine, it will display OK TEST. Turn off the radio, press buttons 2 and 5, and turn on the radio. There will be a beep for 2 minutes. Enter your radio code. The radio configuration will appear on the screen. Here you can configure the audio curve, any regional codes, and the rear speakers.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) To replace the radio in a Renault Megane, use a tool to lever off the trim located at the front of the dashboard, on the passenger side. Next, remove…
Renault Megane (2002-2010 / Megane 2) In this guide, we will see the instructions that will allow us to reactivate the original radio of the Renault Megane, in simple steps. First of all,…
Renault Megane (2008-2015 / Megane III, Megane 3) Begin by removing the plastic trim surrounding the radio to access it. Once the cover/frame is removed, unscrew the screws and pull the radio towards…

    Frequently Asked Questions

    • Megane 2008-2015 - Why does the start and stop not work on the Renault Megane III? Read answer
    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos