Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the EOBD Port on a Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the EOBD (European On Board Diagnostic) port is located on our Renault Megane III: unlike most vehicles, where the diagnostic port is on the left side, at the bottom of the dashboard, on the Megane III, we find the port in the centre, in the console, hidden under a plastic cover just below the radio controls.

Directly under the radio module, there is indeed a plastic gap that you need to remove by prising it off with your fingers or a plastic spatula: inside the compartment, you will find our port, in a bright yellow plastic.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Locating the EOBD Port on the Renault Megane III
Locating the EOBD Port on the Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you will see where the EOBD (European On Board Diagnostic) port is located on a Renault Megane III: there is no difference between rig…
Where is the EOBD Socket on the Renault Megane III?
Where is the EOBD Socket on the Renault Megane III?
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, we will see where to find the EOBD (European On Board Diagnostic) socket on the Renault Megane III. This essential communication inter…
Fuse Layout and Positioning for the Renault Megane
Fuse Layout and Positioning for the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will find essential information regarding the positioning and layout of the fuses for the Renault Megane. First, open the…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos