Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Cleaning the MAF Sensor or Mass Air Flow Meter

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: MAF sensor

See other generations:
Video tutorial

The mass air flow meter, or MAF sensor, measures the volume of air drawn into the engine, which the engine management unit uses to control the amount of fuel to inject; since its operation is based on the variation of an electrical resistance, if this becomes contaminated, it will provide incorrect information to the unit, compromising engine performance and efficiency.

This device is located just after the air filter housing: to remove it, simply disconnect it from the respective inlet and outlet ducts and then clean the resistance with brake cleaner spray: do not use brushes or pins to scrape off deposits!


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to clean the mass air flow sensor on the Renault Megane II
How to clean the mass air flow sensor on the Renault Megane II
Renault Megane (2002-2010 / Megane 2) In this video, you can see how to clean the mass air flow sensor on the Renault Megane II: it is located just beneath the seal of the front windscree…
Cleaning the MAF sensor of the Renault Megane 2
Cleaning the MAF sensor of the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) If the engine of the Renault Megane no longer has a regular supply and the engine malfunction light on the dashboard lights up, we can solve these pr…
Cleaning an EGR Valve on a Renault Megane
Cleaning an EGR Valve on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Watch this video to learn how to clean an EGR valve on a Renault Megane without removing everything. Lift the bonnet and secure it, then use a screwd…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos