Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning the MAF sensor of the Renault Megane 2

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

If the engine of the Renault Megane no longer has a regular supply and the engine malfunction light on the dashboard lights up, we can solve these problems by cleaning the MAF sensor located on the intake. We open the engine hood, find the sensor at the top on the driver's side, disconnect the contacts above the brake fluid reservoir, loosen the clamp of the air tube with a swivel key and remove it, disconnect the connector and unscrew the two torx screws that secure the sensor body, clean the inside with a specific spray.

We reassemble the body paying attention to the gasket, put back the tube, the connector and the contacts.


Posted on 11 February 2025 by ScegliAuto


Related tutorials

Replacement of the Temperature Sensor on a Renault Megane
Replacement of the Temperature Sensor on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here are the brief instructions that will allow you to remove and replace the external temperature sensor on the Renault Megane. First, locate the ex…
Instructions for Cleaning the MAF Sensor or Mass Air Flow Meter
Instructions for Cleaning the MAF Sensor or Mass Air Flow Meter
Renault Megane (1995-2003 / Megane 1) The mass air flow meter, or MAF sensor, measures the volume of air drawn into the engine, which the engine management unit uses to control the amount…
How to Replace the ABS Sensor on the Renault Megane
How to Replace the ABS Sensor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows you how to remove and replace the ABS (Anti-lock Braking System) sensor on the Renault Megane, following the instructions below. Fir…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos